Motul Motorcycle Bundle with Visor and Helmet Cleaner, Fork Oil and Chain Lube

This is a listing for a Motul Motorcycling Bundle including the following items; 1 x Motul 102992 M1 Helmet and Visor Cleaner (Usually £7.71) 1 x Motul 111649 C2 Chain Lube (Road) (Usually £9.51) 1 x Motul 114074 Fork Oil 10W Medium (Usually £11.14) TOTAL £28.36 ONLY £22.99 ----------------------------------------------------------------------------------------- Motul 102992 M1 Helmet and Visor Cleaner - 250ml Helmet exteriors and visor cleanerNeutral and non-aggressive formulaTrigger spray Application: Neutral and non-aggressive cleaner for the outside of the helmet and visor. Cleans helmet exteriors and visor without leaving streaks. Key Benefits: Neutral and non-aggressive formula. Removes oily and dry dirt without damaging the surface. Suitable for all helmets and for all technologies of visors. Anti-insect action for optimal cleaning. Usage Instructions: Spray MOTUL HELMET & VISOR CLEAN from a distance of 20 cm approximately over the outside of the helmet and over the visor. Leave to dry for a few moments. Wipe with a soft and dry cloth to obtain a perfect finish ----------------------------------------------------------------------------------------- Motul 111649 C2 Chain Lube (Road) - 400ml Lubricant for road motorcycle chains Colourless and very sticky Spray Aerosol Application: All types of chains : standard and with O-RING, X-RING, Z-RING. Street motorcycles, go-karts. Specially recommended for very fast motorcycles: MOTUL CHAIN LUBE ROAD adheres to the chain even at high speeds Key Benefits: Reduces friction and loss of power. Increases chain durability. Water and rust resistant. No action on seals. Contains a solvent to eliminate old residue and to penetrate into the links Recommendations: Clean the chain with MOTUL CHAIN CLEAN. Shake before use. Apply to the whole length of the inner chain: MOTUL CHAIN LUBE ROAD adheres completely after a few minutes. ----------------------------------------------------------------------------------------- Motul 114074 Fork Oil 10W Medium - 1 Litre Hydraulic Fluids for any type of telescopic Forks Technosynthese® 4 Viscosities:LIGHT – MEDIUM – MEDIUM/HEAVY – HEAVY Application: Specially designed for any type of fork, upside-down (USD) forks or conventional ("right-side-up") forks. Key Perfromance Benefits: Specific Technosynthese® formulation that contains exclusive anti-friction additive specially developed by MOTUL to create easier sliding and to avoid drag in the fork. Stable absorption trough extended range of temperature thanks to the use of synthetic base stocks. Seals protection: excellent lubricant / elastomer compatibility. Anti-wear, anti-corrosion, anti-foaming. Recommendations: MOTUL Fork Oil Expert can be mixed to obtain the required absorption effect. Use the exact quantity recommended by the fork manufacturer. Properties: LIGHT MEDIUM MEDIUM/ HEAVY HEAVY 5W 10W 15W 20W Density at 20°C ASTM D1298 0.844 0.859 0.865 0.874 Viscosity at 40°C ASTM D445 18.9 mm²/s 35.9 mm²/s 58.1 mm²/s 81.1 mm²/s Viscosity at 100°C ASTM D445 4.0 mm²/s 6.1 mm²/s 8.4 mm²/s 10.1 mm²/s Viscosity Index ASTM D2270 108 116 116 103 Flash Point ASTM D92 198°C / 388°F 232°C / 449°F 232°C / 449°F 230°C / 446°F Pour Point ASTM D97 -42°C / -44°F 33°C / -27°F 33°C / -27°F -27°C / -17°F